DESCRIPTION SHEET

All details are without guarantee, the information below can be out of date, always refer to description sheet in the Charter Party agreement. This information cannot be relied upon contractually at any time.

Vessel

Name:

Ante Topic

Built:

19.01.2017. at Onomichi Dockyard Co., Ltd. - Onomichi - Japan

Type:

Bulk Carrier

Flag:

Marshall Islands

Call Sign:

V7TR4

Headowners:

ALGROTTO NAVIGATION COMPANY INC, MONROVIA, LIBERIA

Managers:

MARFIN MANAGEMENT S.A.M.
30, AVENUE DE GRANDE-BRETAGNE
98000 MONACO
TELEPHONE: +377 93.10.61.00

Classification:

Lloyd's Register +100A1, Bulk Carrier, CSR, BC-A, ESP, Ship Right ((ACS(B) BWMP (T), CM, IHM))
Strengthened for heavy cargoes, Holds Nos. 2 & 4 may be empty, GRAB [20], IWS, LI, +LMC, UMS, SCM
Holds suitable for unloading by grabs, Complying with SOLAS XII.

Marshall Islands Official No.: 6801

LR/IMO No.: 9737072

LOA: 199.90 m

Beam: 32.26 m

Depth mol.: 18.60 m

Light Weight: 11397 mt

Constant including FW: abt 500 mt

Tonnage	International	Suez	Panama
GRT	34905	35590.98
NRT	19977	32275.48	28910

Consumption & speed

Capacity

Draft and Deadwight (Freeboard Ord.):	Draft	Displacement	Deadweight	TPC	Freeboard	Top of # 1 Hatch Coam.(m)	Top of #2,3,4,5 Hatch Coam.(m)	Highest Hatch Coam.(m)
Tropical Fresh	13.634 m	73159 mt	61762 mt	60.5	5.015 m	6.79 m	7.66 m	abt 36.3 m
Fresh	13.362 m	71554 mt	60157 mt	60.4	5.287 m	7.06 m	7.93 m	abt 36.6 m
Tropical	13.337 m	73192 mt	61795 mt	60.4	5.312 m	7.09 m	7.96 m	abt 36.6 m
Summer	13.065 m	71552 mt	60155 mt	60.2	5.584 m	7.36 m	8.23 m	abt 36.9 m
Winter	12.793 m	69916 mt	58519 mt	60.0	5.856 m	7.63 m	8.50 m	abt 37.2 m

CUBIC BREAKDOWN GRAIN/BALE IN HOLDS:
Hold No.	1	2	3	4	5	Total
Grain	15098.3 m3	15518.2 m3	15516.9 m3	15498.3 m3	14922.5 m3	76554.2 m3
Bale	14486.5 m3	14945.7 m3	14932.0 m3	14917.7 m3	14395.3 m3	73677.2 m3

ON DECK CARGO FOR LUMBER:
Hold No.	1 - on deck	2 - on deck	3 - on deck	4 - on deck	5 - on deck	Total - on deck
Volume	2938.8 m3	3506.2 m3	3506.2 m3	3405.5 m3	2801.8 m3	16158.5 m3
Weight Dep	1506.4 mt	1797.3 mt	1797.3 mt	1745.7 mt	1436.2 mt	8282.9 mt
Weight Arr	1657.0 mt	1977.0 mt	1977.0 mt	1920.3 mt	1579.8 mt	9111.1 mt
Note: In the arrival condition, assumed that the weight of deck cargo has been increased 10% due to water absorption
On deck height	6.0 m	6.0 m	6.0 m	6.0 m	6.0 m

MAXIMUM PERMISSIBLE UNIFORM LOAD (mt/m²) & Local Strength of Tank Top Plate & Long. (mt/m²)
Hold Tanktop	1	2	3	4	5	UPPER DECK	HATCH COVER
Homogenous	22.0	15.0	22.0	15.0	22.0	6.00 mt/m² (1&2)	2.40 mt/m²
Alternate	22.0	-	22.0	-	22.0	6.0 mt/m² (3,4&5)	2.4 mt/m²
Local Strength of Tank Tops (1 ~ 5) 25.00 mt/m²						Except between hatches	2.4 mt/m²

	Permissible Max. Weight (mt)			Permissible Max. Weight (mt) for two (2) adjacent holds	Cargo Hold	Hatch area (m²)		Tank top flat area (m²)
	Homo. Load	Alt. Load		Permissible Max. Weight (mt) for two (2) adjacent holds
No.1 CH	15051	20150	No.1&2 CH	30514	No.1 CH	388.5 m²	688.8 m²
No.2 CH	15463	Empty	No.2&3 CH	30926	No.2 CH	388.5 m²	671.4 m²
No.3 CH	15463	20650	No.3&4 CH	30926	No.3 CH	388.5 m²	671.4 m²
No.4 CH	15463	Empty	No.4&5 CH	30259	No.4 CH	388.5 m²	671.4 m²
No.5 CH	14796	19750			No.5 CH	388.5 m²	591.5 m²

MAXIMUM PERMISSIBLE HOT ROLLED STEEL COIL LOAD (mt)
Max.(2) two tiers of 25 mt hot rolled coils of minimum 2.2 m length on minimum (4) four rows of wooden dunnage per (1) one hot rolled coil.

Holds dimensions

DIMENSIONS OF HOLDS AND TANKTOP FLAT AREA FREE OF CORRUGATIONS IN METERS:
Hold No.	1				2		3		4		5
	L	B			L	B	L	B	L	B	L	B
		FW	MID	AFT								AWT	FWD	AFT
Hold	30.63	31.25	32.26	32.26	30.63	32.26	30.63	32.26	30.63	32.26	30.63	32.26	32.26	32.16
Tanktop	30.63	17.00	23.98	23.98	28.00	23.98	28.00	23.98	28.00	23.98	28.00	23.98	23.98	12.90

Hatch dimensions:

#1,2,3,4,5 - 21.00 m X 18.50 m X 1.20 m (Coaming Height ) X abt. 0.87 m (Hatch Cover Height)

Hatch Cover type:

El-hydraulic fwd/aft folding 2 panels - each hold total 4 panels

Cranes description:

4 MHI Electro-Hydraulic deck cranes - SWL 36 MT
Maximum outreach: 9.870 m

Tank Capacity:	IFO m³	IFO mt (0.935)	MDO m³	MDO mt (0.880)	LS MGO m³	LS MGO mt (0.860)
100% full	1821.9 m³	1703.5 mt	195.4 m³	172.0 mt	84.7 m³	72.8 mt
92% full	1639.7 m³	1533.2 mt	175.9 m³	154.8 mt	76.2 m³	65.5 mt
Unpumpable	60 m³	56.1 mt	5 m³	4.4 mt	1 m³	0.9 mt
4 SMAG Peiner El. Hyd. Motor Dual Scoop Grabs , SWL 15 mt ; max. capacity 15 m3 ; DWT 9350 kg
FW tanks capacity (100% cap.)	526.2 m³
Ballast tanks capacity (100% cap.)	Light: 17251.3 m3 (w/o No 3 Cargo Hold)			Heavy: 32768.2 m3 (with No 3 Cargo Hold)

Others informations

FW Evap. daily prod.:

30 mt

CO2 fitted in all cargo holds

Bulkhead between cargo hold No 5 and engine room equivalent to A60 bulkhead

Cement holes:

4 per hatch ; dia abt 0.7 m positioned abt 2.20 m from longitudinal centerline, 2 port & 2 stbd

Hold ladders:

In each hold 1 Australian and 1 vertical ladder fitted with resting platforms

Vessel not fitted for deck timber/logs loading, no stanchions, chains, turnbuckles and other lashing material on board. However, has sockets and padeyes as set out below.

Sockets and pad eyes:

On deck: eye plates 342 pcs located close to handrail abt 1.5 m distance between each other and hatchways. Sockets 142 pcs located close to handrail and abt 2.5 m distance between each other ; dimensions 360 x 360 mm, height rear abt 600 mm, front abt 320 mm ; In holds: eye plates abt 195 pcs located in way of frames and bulkhead at height of 5.0 m

Main engine MAN B&W 6S50ME-B9.3 Mitsui MAN B&W	OUTPUT	BHP	KW	R.P.M.
	M.C.O.	12410	9000	117.0
	N.C.O.	9197	6670	105.9

Main Diesel Generator, 3 sets:

Prime mover: DAIHATSU
Generator: 650 kVA (812.5 kVA), AC 450V, 60 Hz, 3 Phases

Vessel’s current

220 VAC, 60 Hz

Deballasting time - No BWTS

16 hrs (TBC)

Hold’s ventilation

Natural

Paint system in holds

NKM Non-coal tar epoxy

Mooring Arrangement

Fwd

2 independent anchor windlass, each with 1 chain wheel, 2 hawser & 1 warping drums

Aft